Popular Post

Wednesday, June 15, 2011

Husqvarna 288xp

images husqvarna 288xp 288 lite Husqvarna 288xp. Husqvarna 288. Husqvarna Logo Red; Husqvarna Logo Red. gnasher729
  • Husqvarna 288. Husqvarna Logo Red; Husqvarna Logo Red. gnasher729



  • tnite
    07-30 02:19 PM
    I wouldnt be surprised if this thread is referenced by numbersusa and alipac.us as " H1B's using anchor babies to get Green cards"

    They did have it in their fax campaign but removed it.





    wallpaper Husqvarna 288. Husqvarna Logo Red; Husqvarna Logo Red. gnasher729 Husqvarna 288xp. Husqvarna 288. Husqvarna CR250/WR300; Husqvarna CR250/WR300. TwoSocEmBoppers
  • Husqvarna 288. Husqvarna CR250/WR300; Husqvarna CR250/WR300. TwoSocEmBoppers



  • pappu
    05-13 01:42 PM
    Does anyone have access to this article :
    http://www.diversityinc.com/members/login.cfm?hpage=21367.cfm&CFID=1754493&CFTOKEN=26728028
    It looks like favoring us ....

    this news site was members only to read the new article. could you copy and paste this article in the forums so that we all can read?





    Husqvarna 288xp. Husqvarna Chainsaw Model 154SE
  • Husqvarna Chainsaw Model 154SE



  • dealsnet
    11-08 02:06 PM
    Family based, majority (90%) is done by consular processing. AOS mostly for EB based. Petition for relatives is from the mother country, who is not present in USA for AOS. Yes - I agree with andy garcia

    I-130, Petition for Alien Relative
    I-140, Immigrant Petition for Alien Worker

    Both require a I-485 to adjust status





    2011 Husqvarna 288. Husqvarna CR250/WR300; Husqvarna CR250/WR300. TwoSocEmBoppers Husqvarna 288xp. Husqvarna 288. husqvarna chainsaw workshop; husqvarna chainsaw workshop
  • Husqvarna 288. husqvarna chainsaw workshop; husqvarna chainsaw workshop



  • snathan
    05-19 12:59 PM
    You just have to justify by saying, you have been in US on H1B visa and you came back after you have completed your project. Aftre that it is upto consulate.

    I dont think H1B was the reson behind this denial. Remember the law suit against infy for B1 visa...



    more...


    Husqvarna 288xp. Husqvarna 288. Top Cover Shroud Fits Husqvarna 281 288 - aftermarket
  • Husqvarna 288. Top Cover Shroud Fits Husqvarna 281 288 - aftermarket



  • ivar
    02-07 09:46 AM
    IVAR congratulations once again to you and your family, enjoy the green and free life to the fullest now.

    Teddy,

    Thanks for all your support, you are doing a great job by keeping the predictions thread alive, it gives lot of hope to everyone and encourages to hang on. I wish everyone will get there soon.





    Husqvarna 288xp. Images Husqvarna 288xp
  • Images Husqvarna 288xp



  • pa_arora
    07-18 07:22 PM
    1) I think you can file EAD /AP even if you dont have a AOS receipt. Can someone comment on this?

    2) What all docs are required for filing EAD & AP?



    more...


    Husqvarna 288xp. HUSQVARNA 288XP CHAINSAW HO
  • HUSQVARNA 288XP CHAINSAW HO



  • suresh.emails
    01-23 11:34 AM
    Well,

    The following is the process to schedule parents visiting visa interview online (assuming both Mother and Father are above 45 years old)

    1. Pay HDFC Visa fee for $131. If you have paid visa fee on or before December 31, 2007, then take a Demand Draft for $31 (eqv in INR) and present the same during the interview process.

    2. Wait for 2 days to activate the bar code.

    3. Fill the D-156 and D-157 forms online thru VFS website and wait for dates to show up. Remember such filled application will be valid for 7 days and meanwhile , if interview dates show up, then one can schedule interview.

    4. The BEST TIME FOR interview dates check up is early morning 5 AM EST thru 7:30 AM EST. ( I did little research during my parents interview schedule).

    5. Filling the D-156 and D-157 online does not mean that, they will be automatically submitted to US consulate. You have to take print out D-156 back to back and D-157 on single page. Then you sign and date the form (if you have filled it on behalf of your parents). Send the forms to parents. They also need to sign the forms.

    6. Remember, one have to write applicant names in their NATIVE language (ex: Telugu/Tamil/Kannada etc..,) on 3'rd column of D-157 form.

    7. Send notarized affidavit for support I-134 form.

    8. All supporting documents

    9. If your current H1-B visa is expired. then send your Receipt Notice/H1-B extension approved notice as a proof of your Current STATUS at USA.

    10. If you have valid H1-B visa stamping, then send the same along with H1-B I-797 approval notice.

    11. If you are on EAD/GC, send your copied of EAD/GC.

    12. In case, if you are sponsoring your in-laws. Then send your suppose Date of Birth certificate, passport copies, marriage certificate along with your documents.

    13. Educate your parents with all possible questions/answers they may face during the interview.

    14. Advice your parents not to lie during the interview process. ask them to answer frankly.

    Let me know if you need more information for visiting visa. I can/may answer all possible questions.

    P.S: My parents got their visiting visa stamped during the second attempt.





    2010 Husqvarna Chainsaw Model 154SE Husqvarna 288xp. husqvarna 288xp 288 lite
  • husqvarna 288xp 288 lite



  • gc28262
    04-08 06:27 AM
    Looking at this issue, isnt' it USCIS who is at fault here ?
    How can they allow the employer to "reuse" the original labor when employee1 has already used it for his I-140 approval ?

    This is definitely a USCIS mess. Employees/beneficiaries shouldn't be paying the price for USCIS's fault.



    more...


    Husqvarna 288xp. Husqvarna 288 xp to Drop em!
  • Husqvarna 288 xp to Drop em!



  • larryking
    10-22 06:55 PM
    485Mbe4001 thanks for your reply. If you look at visa bulletin - Priority date for EB 3 is 1 Aug 2002. So from your reply, I gather, that they would look at processing all the applications they have on file from 2002 upto 2007 for "Latvia". And only if they end up with some visa numbers remaining due to lack of applicants, will those number be transferred to other countries.... Right??





    hair Husqvarna 288. husqvarna chainsaw workshop; husqvarna chainsaw workshop Husqvarna 288xp. Husqvarna 288xp
  • Husqvarna 288xp



  • needhelp!
    08-23 06:38 PM
    I am new here, Could anyone explain what is Texas State Chapter Activation about? how does that work? thanks!

    Join here (they will need your phone number)
    http://groups.yahoo.com/group/texasiv



    more...


    Husqvarna 288xp. Husqvarna 288. fuel line hose
  • Husqvarna 288. fuel line hose



  • centaur
    02-09 11:08 AM
    Bush is for immigration reform.

    I see people disliking him, but to be fair to him, that man had some very good ideas when he became the president. He was unlucky that 9-11 happened when he was just 9 months into presidency and inexperienced, but his response was good, and it was wrong for him to go into Iraq as the reasons were all wrong. That was a huge mistake, probably in-expereince, wrong advisors, oil lobby, and some of the fear from 9-11, all contributed to that decision.

    Overall, he has done more in terms of changing things, and has started debates on more controversial issues than anyone before. He has done more for the world trade, es[ecially countries like India, China and Brazil. He has gone beyond racial and gender factors, as reflected in choice of his staff and advisors.

    Debates have to be started before anything happens and sometime it takes years, even after the presidency is over.

    It's easy to blame him for everything as he is the face we see. I am not a Bush supporter, but actually a huge Clinton fan, but I think we tend to be overly unfair to the man. He has an office that comes with blames, sometimes decisions are not easy and you could go wrong either way. I think he tends to err on side of doing more than less, while Clinton was opposite and kept things stable, but also didnot start changes or lay grounds for change to take place.

    As a president I think he has probably done more, or sets things in motion, more than Clinton did. Sometimes things need changing, and initial in-stability goes with the change.

    The Judicial system is run by Bush and et al..they wont listen to soemone who they are not answerable to.





    hot Husqvarna 288. Top Cover Shroud Fits Husqvarna 281 288 - aftermarket Husqvarna 288xp. Husqvarna 288XP
  • Husqvarna 288XP



  • glus
    06-28 04:47 PM
    O MY GOD !! You are so right............guys.. check out Rajiv Khanna's web site, Check out Sheela Murthy's web site, USCIS.....everyone is saying the same.........we are royally screwed. God Helppppppppppp

    You are as stupid as what you wrote.



    more...


    house Husqvarna 288. VINTAGE 1970#39;S HUSQVARNA; VINTAGE 1970#39;S HUSQVARNA Husqvarna 288xp. Additional Husqvarna 281XP
  • Additional Husqvarna 281XP



  • ak_manu
    04-09 03:27 PM
    Hi,

    My current EAD will expire in September 2008. It is applied through Company A. I want to change my employer in July to Company B. But I would think during
    that time frame I would have already applied for my EAD renewal.

    Can I transfer to Company B during this renewal process?

    Thanks
    AK





    tattoo Images Husqvarna 288xp Husqvarna 288xp. Husqvarna 288. Husqvarna 44 Rancher manual; Husqvarna 44 Rancher manual
  • Husqvarna 288. Husqvarna 44 Rancher manual; Husqvarna 44 Rancher manual



  • raydhan
    06-13 01:49 PM
    Hello everyone,

    I am on the EB3 category and have a PD of March 19, 2002. Also, I am from a non-retrogressed country (Brazil). Would any of the wise members of this forum be willing to estimate how much longer I'd have to wait until I am concurrent? Thanks in advance.

    camberiu,
    Let's forget about the visa numbers. My P.D. is Jan'02 (EB3-India :( )and I am not expecting any movement significant movement for the next 4-6 months.

    Atleast you can expect some good news in the World Cup on July 9th. Hope to see Cafu lift Brazil's 6th Cup.

    You better log off and watch Brazil-Croatia in 10 minutes.



    more...


    pictures HUSQVARNA 288XP CHAINSAW HO Husqvarna 288xp. wallpaper Husqvarna 288 xp to
  • wallpaper Husqvarna 288 xp to



  • Sachin_Stock
    02-03 10:42 AM
    I have a question.

    I am EB3 with priority date Oct. 2006. My qualification from India is 3 years (B.Com) plus 1 year of M.com (I didn't complete the 2nd year) plus Intermediate ICWA and Chartered Accountancy. I got here in the USA in December 1999 on H1B and always maintained the status. I completed CPA in 2002 in the USA.

    I did some research to port to EB2 (based on Bachelors degree plus 5 years experience) but it seems that USCIS wants 4 years continuous degree to be considered for EB2.

    Is that true? Is there anyone in my situation who has done this porting successfully?

    Any help will be greatly appreciate.

    Thank you,

    That is correct. Mixing and matching with certifications doesn't work. Although I don't know about CPA, if it goes towards professional degree.





    dresses Husqvarna 288XP Husqvarna 288xp. Husqvarna 288. Husqvarna nagant- Any Info? Husqvarna 288
  • Husqvarna 288. Husqvarna nagant- Any Info? Husqvarna 288



  • ashkam
    08-07 10:44 AM
    if my wife is already in US on H4 do i need to file a I-134 ,I-864 too ??

    Also do i need to add my tax return, my I20 and my paystubs with application. She just came into country so she does not have any tax rerurn of her own nor any I20 or any paystubs of her own.. Please suggest.

    Thanks
    -M

    The tax returns, W2s, paystubs etc should be yours, not hers, since she is filing as a dependent. I'm not sure if you need to attach your I-20. I'm not sure if you need to file an I-134 but my attorney recommended me to file an I-864 although I-485 instructions are not clear on whether its inclusion is necessary or not. But I would say why not file it just to be safe.



    more...


    makeup Husqvarna 288 xp to Drop em! Husqvarna 288xp. Husqvarna 288. VINTAGE 1970#39;S HUSQVARNA; VINTAGE 1970#39;S HUSQVARNA
  • Husqvarna 288. VINTAGE 1970#39;S HUSQVARNA; VINTAGE 1970#39;S HUSQVARNA



  • jediknight
    10-12 12:00 PM
    Lou Dobbs� Next Home: Fox Business? (http://mediadecoder.blogs.nytimes.com/2009/10/12/lou-dobbs-next-home-fox-business/)

    Fox can keep him along with their other crazies :-)





    girlfriend Husqvarna 288. Husqvarna 44 Rancher manual; Husqvarna 44 Rancher manual Husqvarna 288xp. Husqvarna 288. Husqvarna 455 Rancher 20-Inch; Husqvarna 455 Rancher 20-Inch
  • Husqvarna 288. Husqvarna 455 Rancher 20-Inch; Husqvarna 455 Rancher 20-Inch



  • rkg000
    04-21 10:09 AM
    Friends,
    I will be relocating to Houston soon. I am new to the area. I would really appreciate if you can give your inputs on good neighborhoods, cost of living, etc.

    Thanks,
    nmdial

    We moved to Houston (Sugar Land) last year from NJ. Liked this place a lot. I liked Sugar Land as anything you need is at stone's throw distance. Didn't contemplate other suburbs as this was the closest to our work place.





    hairstyles Husqvarna 288. fuel line hose Husqvarna 288xp. New 281 288 288 Xp Husqvarna
  • New 281 288 288 Xp Husqvarna



  • raghureddy
    03-18 06:03 PM
    The reason they said was they are doing the back ground check on the company. But i am on the payroll from the same company since last 4years...





    genius
    12-14 08:06 PM
    Unfortunately,kaplan doesnt issue I-20's anymore.
    Are you sure than ,while the H1B is being processed ,you can live here legally?
    Also what if I get use premium processing and get my H1B approved earlier,would I be able to start work before Oct 1st?

    My OPT expires in May 2007 and I have my Masters from here...

    Thanks in advance!!!





    maddipati1
    02-03 01:50 PM
    anyone know if,

    Bachelors Equivalent ( Bachelors-3Yrs + Masters-2Yrs )

    + 5 years Experience

    qualify for EB2 ?

    thanks,




    I also have 3 years bachelors. My lawyer told me that EB2 cannot be approved with 3 years bachelors and even if we try we are taking risk of having USCIS dig approved Eb3 labor and I140.



    No comments:

    Post a Comment